NOX DRAW SS 100
LUBRINOX® NOX DRAW SS 100 is premium quality neat drawing oil specially developed for the drawing operations of stainless steel and its alloys. It is an active type of fluid which is highly fortified with sulphur and chlorine to impart high degree of extreme pressure and anti wear properties during the operation. It is highly enriched with lubricity agents.
Available pack Size
- 20 Ltr
- 50 Ltr
- 210 Ltr
Application
- Recommended for the drawing operations of stainless steels and its alloys only.
- It is not suitable for the non ferrous metals.
Benefits
- Increase tool life.
- Prevents wear.
- Excellent surface finish.
- Longer service life.
- Operator’s friendly.
Precaution
Avoid prolonged and repeated contact with used oil. Used oil contains potentially harmful contaminants. Keep out of reach of children. Used oil must be disposed off carefully to prevent damage to environment.
Typical Characteristics
| TEST PARAMETERS | TYPICAL VALUE | |||||||
| Appearance | Clear Liquid | |||||||
| Kin. Viscosity @ 40˚C,cst | 96 | |||||||
| Flash Point˚C, COC, min | 200 | |||||||
| SAP Value, mgKOH/gm | 20 | |||||||
| Copper Corrosion at 100˚C. for 3 hrs | 4c | |||||||