NOX CUT 25
LUBRINOX® NOX CUT 25 is excellent neat cutting oil developed for the machining of ferrous metals (not for yellow metals). It contains active sulphur and fatty materials to provide better result under severe machining operations. Its low viscosity composition helps in swarf removal during the process.
Available pack Size
- 20 Ltr
- 50 Ltr
- 210 Ltr
- It is highly recommended to be used for the machining of ferrous metals for deep hole drilling and other severe operations.
- Improve tool life.
- Better finish.
- Sufficient cooling to the cutting tools.
- Proper lubrication.
- Reduced maintenance cost.
Avoid prolonged and repeated contact with used oil. Used oil contains potentially harmful contaminants. Keep out of reach of children. Used oil must be disposed off carefully to prevent damage to environment
|TEST PARAMETERS||TYPICAL VALUE|
|Appearance||Bright & Clear|
|Kin Viscosity. @ 40˚C, cst||25|
|Flash Point˚C, COC, min||170|
|Copper Corrosion @ 100˚C for 3 Hrs||4a|